This Limestone tiled floor was located in the entrance hall of a residential property in Burford. I popped round following a cleaning enquiry to provide a quote and did a sample clean on a test area, I was then asked if I could do the whole floor there and then and not wanting to disappoint I managed to shuffle a few appointments round and got on with it.
Cleaning Limestone Floor Tiles
To get the best from this floor I used a set of diamond encrusted burnishing pads which if you have read any of my previous posts you will remember we always recommend these for hard stone floors such as Limestone, Travertine and Marble. They come in four different grades from coarse to very fine and you work your way through them starting off with the coarse stripper pad with a little just water and then carry on with the remaining pads which are a finer and finer grade until the floor is thoroughly cleaned, polished and any previous sealer removed. Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout clean. When done the floor was washed down with water which was then removed from the tile using a wet vacuum and then left to dry.
Sealing Limestone Floor Tiles
Once the floor was dry it was sealed using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer which provides maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white buffing pad.
The customer was very pleased with the results so much so she booked me to clean the grout on her kitchen floor.