Cubicle Archives - Oxfordshire Tile Doctor

Porcelain Shower Before After Renovation in Didcot

Mould-Covered Porcelain Shower Tiles Refreshed in Didcot

Available in a variety of styles and designs Porcelain tiles are harder than normal Ceramic tiles and are known for their durability and water resistance, making them ideal for use in shower cubicles and bathrooms.

However, as I’m sure most people already know, shower tiles are not the easiest to keep clean and fresh. These tiles are exposed daily to a multitude of acidic soaps and shampoo dyes, and if proper precaution is not taken to rinse away the excess after using the shower, mould will grow very quickly on the grout.

This shower cubicle, constructed from Porcelain tiles, is a typical example of this. As you can see from the photo below, the mould problem was very apparent. I was asked by the property owner, who lives in Didcot, a railway town in South Oxfordshire, to refresh it after what must have been years of neglect. Here’s how I did it.

Porcelain Shower Before Renovation in Didcot

Cleaning a Porcelain Tiled Shower Cubicle

The first process in restoring this shower cubicle was to spray the walls with Tile Doctor Duo Clean, which is both a grout cleaner and a mould remover. I left it to dwell for 45 minutes, before proceeding to scrubbing into the grout with a stiff brush. I worked in sections, spraying more Duo Clean onto the tiles as I moved along the length of the walls.

Following this, I rinsed the entire cubicle with fresh water to remove any traces of chemicals and used my wet-vac machine to dry it quickly. The next process was to remove the old, mouldy silicone and replace it with fresh silicone.

Sealing a Porcelain Tiled Shower Cubicle

With the shower cubicle now fresh and clean, it was now time for me to seal the grout and tiles.

I did this using Tile Doctor Wall Grout Sealer Spray, which is a water-based grout sealer that prevents oil, water and acid-based contaminants – including soaps and shampoos – from spoiling the appearance and colour of grout. It does this while allowing for moisture vapour transmission.

Check out the photo below – you can see that after a short day’s work, the appearance of the cubicle has been completely transformed. The customer was very pleased with the result and the addition of the sealer will ensure it stays this way for some time to come.

Porcelain Shower After Renovation in Didcot

Professional Porcelain Tiled Shower Cubicle Renovation in Didcot

Mould-Covered Porcelain Shower Tiles Refreshed in Didcot Read More »

Slate Tiled Shower Cubicle Ruined by Limescale Renovated in Wantage

This house in Wantage was on the market to be sold but many potential buyers had been put off by the poor condition of the Slate tiled shower cubicle. Wantage is a lovely little market town in the south of Oxfordshire and a desirable location to live.

However, before this house could be sold, the shower cubicle needed to be renovated; as you can see from the photos below, there was a heavy build-up of limescale that needed to be removed.

Slate Tiled Shower in Wantage Before Cleaning

With the property owner keen to sell the house, he asked me to get the shower cubicle back to looking its very best. This would involve a deep clean, acid wash and seal.

Cleaning Limescale Damaged Slate Shower Tiles

To begin the restoration, I cleaned the walls using Tile Doctor Pro Clean. This is a strong alkaline product which is powerful and sage to use on natural stone to eradicate dirt and residue that has built up over time. I scrubbed the Pro Clean into the tiles and grout lines, before rinsing the entire area with fresh water.

The next stage involved removing the heavy build-up of limescale. This was done using Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in gel form. Being in this form makes it especially effective for use on sloped and vertical surfaces as it it’s easier to control and can dwell for a long time where required. The product deals with alkaline-based limescale and mineral salt deposits (efflorescence).

I scrubbed the Acid Gel into the affected areas with a stiff nylon brush, before rinsing with fresh water. I then needed to repeat this process twice more to make sure all the limescale was completely removed. Following this, I left the shower to dry before sealing.

Sealing Slate Shower Tiles

After letting the shower cubicle tiles dry, I sealed them using Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer.

The sealer is specially formulated to really emphasise the different natural tones and shades in the stone, in turn lifting the appearance of the entire room. In this situation, two coats of Colour Grow were used to provide robust, long-lasting protection.

Slate Tiled Shower in Wantage After Cleaning and Sealing

The customer was very impressed with the finished result and I’m sure any prospective property buyers will be equally impressed by the feature bathroom! Another satisfied client.

Cubicle