Dirty Black and Red Quarry Tiles Rejuvenated in Thame

Sometimes it isn’t until you’ve deep cleaned your tiles that you realise just how dirty they were to begin with. This was the case with my customer in Thame, in the south of Oxfordshire where I worked on a classic red and black Quarry tiled floor which was far from being in its best condition.

Quarry Tiled Floor Before Cleaning Thame

Cleaning Dirty Quarry Tiles

My starting point in the cleaning process was to mix a strong solution of Tile Doctor Pro Clean, which is the reliable, multi-purpose alkaline cleaner that is safe to use on tile, stone and grout. The solution was left to soak into the tiles for ten minutes before being scrubbed into the floor with a rotary floor machine fitted with a stiff brush.

Following this, I rinsed the floor with clean water and then proceeded to wash it with Tile Doctor Grout Clean Up. This is a concentrated phosphoric acid cleaner designed to remove efflorescence and other mineral deposits such as grout smears.

Finally, I rinsed the tiles again with water and Tile Doctor Neutral Tile Cleaner, which is a pH neutral solution, to neutralise the chemicals and leave the floor fresh and clean, ready to be sealed. The floor was left to dry overnight.

Sealing Quarry Tiles

The next day I returned to seal the floor after checking the tiles were dry. I opted to use two different sealers. The first was Tile Doctor Colour Grow, which is an impregnating sealer with the added effect of enhancing the natural colour in the stone. The second was Tile Doctor Seal & Go, a topical sealer that adds the high quality, durable sheen finish to the floor that the customer had requested.

I took the photograph below after sealing half the floor, it really shows the difference a sealer can make to a tiled floor.

Quarry Tiled Floor During Sealing

Here’s the photo of theQuarry tiled floorafter sealing the whole floor. As you can see, they now have a new lease of life, and they’ll be much easier for the customer to keep looking great in the future.

Quarry Tiled Floor After Cleaning Thame

 
 

Professional Cleaning and Sealing of a Dirty Quarry Tiled Oxfordshire

Terracotta Tiled Kitchen Floor Cleaned and Sealed in Thame

This customer had recently moved into a house with a Terracotta Tiled Floor in Thame, Oxfordshire and decided she did not like the colour of the floor grout and also was unable to clean off some back marks in the corners. When I went to view the property I performed a test clean on a sample area to show her that the black marks could be removed and also stripped back the tile show how much cleaner they could look. The work was agreed and I was booked to come back and completely strip the floor tile, reseal it and also change the grout colour.

Terracotta Tiled Floor Thame Before Cleaning

Cleaning Terracotta Tile

On the first day I carefully taped up all the kitchen cupboards and skirting board to protect them from any splashes or damage. Once this was done a strong dilution of Tile Doctor Pro-Clean which is a multi-purpose cleaner and stripper was applied to the Terracotta floor tiles and left to soak into the tile for a while before being worked in with a rotary machine fitted with a black stripping pad and then a floor scrubber.

Once the whole floor had been treated in this manner the now soiled Pro-Clean solution was removed from the floor using a wet vacuum and then the floor rinsed with clean water using a spinner tool attached to the wet vacuum. The spinner tool has been a great investment for us, it applies water under pressure to the floor and at the same time removes it via an adjacent suction connection saving loads of time; it’s also a versatile tool that can also be used for Carpet Cleaning which incidentally we also do.

The Terracotta tile was now stripped of all sealer so the next step was to cleaned the black grout with Grout Clean Up which is a mild acid cleaner that can remedy a number of grout related issues, after this I rinsed the floor again with fresh water. At this point I noticed some of the grout joints had loose or missing grout so the loose grout was removed and new grout applied to the affected areas, I then had to wait overnight so the floor could dry.

Sealing Terracotta Tile

On the second day I set about sealing the floor using two coats of Tile Doctor Colour Grow which as well as protecting the floor also brings out the natural colours in the Terracotta tile. For added protection and to enhance the shine on the floor I then applied a further five coats of Tile Doctor Seal and Go, the combination of the two compatible sealers provided the effect the customer wanted. I then had to wait overnight for the sealer to dry hard.

Grout Colouring

If you recall from the start of this post, the customer also wanted to change the grout colour to a light grey so I came back for a third day to complete this. With the original grout colour being black I was concerned that the dark grout may show through the lighter grey and so I first let the customer know that it might take two coats of Grout Colourant to achieve this. However once I got started colouring the grout using an applicator I noticed that the light grey was consistently covering the black grout and therefore one coat would be sufficient.

Terracotta Tiled Floor Thame After Cleaning and Sealing

When I had finished she was very impressed by the colour of the tile and grout and remarked on how much brighter her kitchen looked. She also asked me to come back later to do the hall floor which is a multi coloured Victorian floor.
 
 

Terracotta Floor Cleaned and Sealed in Oxfordshire

Filling Holes and Restoring Shine on a Victorian Tiled Floor in Thame

The pictures below were taken in the entrance hall of a residence in the market town of Thame in Oxfordshire where the Victorian Floor Tiles although in good condition had become dull, you will see there is also a photograph of part of the tiles where holes had been drilled in the floor (don’t ask). Naturally the owner wanted both problems resolving and so called in their local Tile Doctor.

Victorian Tiled Floor Thame Before Cleaning 1 Victorian Tiled Floor Thame Before Cleaning 2

Restoring Victorian Quarry Tiles

The first task was to clean the floor which I used a dilution of Tile Doctor Pro-Clean which was left to dwell on the tile for around thirty minutes before being scrubbed in. This was a small area so I used a small black scrubbing pad attached to a cordless drill to do this; a stiff scrubbing brush was also run along the grout lines to make sure any staining to the grout was also dealt with. The resulting soiled solution was then removed using a wet vacuum and the tiles rinsed with water.

The next step was to remove some stubborn paint marks for which Tile Doctor Grout Clean-Up was applied and scrubbed in with a stiff scrubbing brush, you have to be very careful with this product as it is an acid so you can’t leave it on the tile for too long however it does resolve all sorts of tile staining problems. Again this was removed with a wet vacuum and the floor rinsed thoroughly with fresh water to remove any trace of the product.

Sealing Victorian Quarry Tiles

When the floor dried I filled the holes in the Victorian Tile with a quick drying flexible grout which was left to dry and then painted using an acrylic paint to colour the grout the same as the different colours in the tile. On close inspection the hole damage is still visible however they are now a lot less obvious.

The next step was to seal the floor using five thin coats of Tile Doctor Seal & Go which adds a nice sheen to the floor as we as providing protection and making it easier to clean going forward.

Victorian Tiled Floor Thame After Cleaning and Sealing 1 Victorian Tiled Floor Thame After Cleaning and Sealing 2

 
 

Victorian Tiled Hall Restoration in Thame, Oxfordshire

Cleaning a Sandstone Fireplace Surround in Thame

Details below of a Sandstone Fireplace surround from a house in Thame, Oxfordshire. The fireplace had never been cleaned as the customer did not know where to start and so gave us a call.

Thame Sandstone Fireplace Before Cleaning

Sandstone Fireplace Cleaning

To clean the fireplace I used a diluted mixture of Tile Doctor Pro Clean and NanoTech Ultra Clean which combines the cleaning power of Pro-Clean with the tiny abrasive particles in Ultra Clean to produce a very effective cleaning product that is safe to use on Stone. This was left to dwell on the stone for a short while in order to let it soak in and work on the dirt before scrubbing it into the Sandstone with a hand brush. This process did a good job cleaning the stone and once I was happy with the result the soiled cleaning solution was removed using a wet vacuum and the stone was rinsed with water to make sure all the chemical had been removed.

Sandstone Fireplace Sealing

When dry the Sandstone was sealed using a couple of coats of Tile Doctor Colour Grow which will protect the stone going forward as well as bringing out the deep colour in the stone. To finish the job off I removed the grate and cleaned it up using some grate black to make it look new again before putting it back; last step was to remove the protective strip I had put around the fireplace to protect the wall and carpet and the job was done.

Thame Sandstone Fireplace After Cleaning

As you can imagine the customer was quite surprised by the results and hadn’t realised what a wonderful fireplace they had until now.
 
 

Sandstone Fireplace Cleaned and Sealed in Thame, Oxfordshire