Banbury Tile Cleaning

Banbury Tile Cleaning

Welcome to my Work History archive where you will find examples of the cleaning and renovation of tiles carried out in Banbury.

Ceramic Tiled Sports Centre Ceramic Shower Tile Banbury Before after Cleaning

Deep Cleaning Anti-Slip Ceramic Tiles at Banbury Sports Centre

We were contacted by a Sports Centre in Banbury regarding the shower facilities in the changing rooms. The rough nature of the anti-slip ceramic tiles had been trapping dirt and it had a build-up of mould in some areas. In addition, the grout on the wall tiles was very discoloured. Obviously, they are very heavily used, so keeping them maintained is paramount to extending the life of the area and of course keeping the customers happy too!

Ceramic Tiled Sports Centre Ceramic Shower Tile Banbury Before Cleaning

With Sports Centres and Gym’s closed around the country this was the perfect time to get some maintenance work done so I when they called, I was happy to take a look. They accepted my quote and I booked them in for a deep clean. With the facility closed to the public I pretty much had the whole facility to myself so social distancing was not a problem.

Banbury is at the North end on Oxfordshire but fortunately the M40 runs right through it, so it doesn’t take long for me to reach it.

Cleaning a Ceramic Tiled Shower Area

My first task was to give the shower tiles a clean with a strong dilution of Tile Doctor Pro-Clean which was sprayed onto the tile. It was left for ten minutes so it could have time to break down the dirt before being scrubbed in.

After inspecting the shower tile, I could see more work would be needed, so I followed this with an application of another Tile Doctor product called Duo Clean. Again, this was sprayed onto all the shower tile including the floor but this time I left it to soak in for an hour. I then scrubbed the walls and floors and rinsed with water. Tile Doctor Duo Clean is a fast, effective double action grout cleaner and mould remover. It cleans up grout and can also remove mould and blackspot from grout and silicone.

It was necessary to repeat the process as the tiles really were dirty, so I repeated the Tile Doctor Duo Clean process left for another hour, then scrubbed and rinsed. There were several shower areas to clean so I moved onto another shower whilst waiting for the first.

Ceramic tiles are sealed at the factory and so will not accept a sealer however grout is cementous and does benefit from being sealed so for this I recommend using an aerosol grout sealer as this is easy to apply.

Once dry the shower looked 100% cleaner and fresher than before unfortunately due to the Sports Centre being closed it will be a while before their customers will be able to appreciate my work.

Ceramic Tiled Sports Centre Ceramic Shower Tile Banbury After Cleaning

Before leaving I advised the centre manager about the common issues with shower tiles and how best to maintain them in the future. I suggested the use of our Tile Doctor Aqua-Pro cleaner which is a pH neutral tile cleaner which could be used in addition to their existing cleaning regime. Hopefully, this information gets passed to the cleaning team who look after the building however it might be a while before they return.

 

Professional Cleaning of Commercial Shower Tiling in Oxfordshire

Deep Cleaning Anti-Slip Ceramic Tiles at Banbury Sports Centre Read More »

Cream Porcelain Tiles Before After Epoxy Grout Removal Banbury

Epoxy Grout Removal Porcelain Tiles, Banbury

Detailed below is a great example of why Tile Doctor uses the slogan:

“We Love the Jobs Tilers Hate”

First of all, apologies for the photographs, at this time of year it is tricky to get good pictures when the natural light is poor. If you look closely however you should recognise what is essentially a new installation of Cream Porcelain floor tiles. The work was done at a house in Banbury which is a market town in Oxfordshire. Banbury is a significant commercial and retail centre for the surrounding area of north Oxfordshire and southern rural parts of Warwickshire and Northamptonshire.

Epoxy Grout Before Removal From Porcelain Tiles Banbury

The tiler who laid the floor had used an epoxy grout and unfortunately had not polished off the grout quickly enough after grouting and it was now ruining the appearance of the floor. He now found it impossible to remove the excess residue and was unable to offer a solution leaving the problem to the customer to sort out. Fortunately, the client found Tile Doctor and having visited the property to survey the floor and assess the correct procedure required to renovate the tiles. Epoxy grout is a superior product to cement based grout and very resistant to staining however it is trickier to work with and often causes problems. We have come across this problem before however so I knew how to treat it and assured the client it could be resolved.

Removing Epoxy Grout from Porcelain Tiles

The first process was to apply a specialist epoxy grout remover then mix in Tile Doctor Acid Gel, I then scrubbed the resulting solution with a black pad fitted to a rotary machine running at a very slow speed to reduce splashing. The Tile Doctor Acid Gel has a unique pH1 blend of Phosphoric and Hydrochloric acids in a gel form and is perfect for treating grout haze.

The floor was then rinsed with water to remove the soil which was then extracted with a wet vacuum. It was a slow process and I worked in sections until the whole floor was clear. There was still some residue in the grout, so I washed the floor with a medium dilution of Tile Doctor Pro-Clean and scrubbed it into the floor using a medium brush fitted on my rotary machine.

Last step was to give the whole floor a thorough rinse with water, again using the wet vacuum to remove the water and get the floor as dry as possible. The process took about six hours and when I was finished the Porcelain tiles looked much better. There was no need to add any sealant to this floor as this particular make of Porcelain are not porous and won’t accept it.

Epoxy Grout Removed From Porcelain Tiles Banbury

The client was very relieved to see the floor looking as good as new, it was how the floor should have looked following installation.

 

Professional Restoration of a Porcelain Tiled Kitchen in Oxfordshire

Epoxy Grout Removal Porcelain Tiles, Banbury Read More »

Old-Slate-Flagstone-Floor-Restored-in-Banbury

Old Slate Flagstone Tiled Floor Brought Back to Life in Banbury

Every so often we come across exceptionally old tiles that are in desperate need of restoration. These Slate flagstones at a property in Banbury, Oxfordshire had to be a couple of hundred years old, the grout had come loose and I wagered that it’d been covered by bitumen (also known as asphalt), plaster, and concrete for a significant portion of its life.

The property owner was keen to try and restore them and had tried to clean them, only to realise that it was a bigger task than initially thought. Flagstones are known to be hard wearing and durable, but no floor can be easily restored when subject to this kind of treatment. However, at Tile Doctor we are experienced with cleaning tiles in this kind of condition – and I was more than happy to help this customer get these fantastic Slate flagstones back to looking their best.

Old Slate Flagstone floor before cleaning Banbury

Cleaning Old Slate Flagstones

Upon arrival at the property, the first thing I did was to cover the walls to protect them from splashes of cleaning products I would be using. I then started the process by mixing two products – Tile Doctor NanoTech HBU and Tile Doctor Remove & Go – in a bucket and spread it over the entire floor. These two products are both very powerful cleaners on their own and work even better together: NanoTech HBU utilises nano-sized particles to penetrate areas that normal cleaners simply can’t reach, while Remove & Go is specifically designed for the removal of coatings such as old sealers.

For added impact and so the blend of cleaning products would not dry out, I covered the floor with a plastic sheeting, leaving the solution to dwell and work to break down the bitumen, plaster and concrete overnight.

The following day, after removing the plastic sheeting I used my rotary floor machine fitted with a silicone carbon brush to slowly scrub the floor, beginning to loosen the soil. After this, I thoroughly rinsed the floor with water. I then used Tile Doctor Grout Clean Up, which is a concentrated phosphoric acid cleaner to remove the plaster and thin layers of concrete, before again rinsing the floor with water.
Next, I had to remove the particularly thick chunks of concrete carefully using a chisel, before scrubbing the floor with Grout Clean Up once more. To complete the cleaning process, I then mixed a solution of our strong alkaline cleaner, Tile Doctor Pro Clean, with water and scrubbed and rinsed the flagstones with water.

Sealing Old Slate Flagstones

The next day I returned to the property to grout the floor, before leaving it again for another day to fully cure. On the final day, I sealed the floor using Tile Doctor Seal & Go, which is a topical water-based blend of acrylic polymers that provides a stain resistant surface seal combined with a long-lasting low-sheen finish. This eliminates traditional two-step sealing methods. I applied eight coats of this to give the floor the strong sheen (seen in the below photo), that the customer requested.

Old Slate Flagstone floor after cleaning Banbury
The floor had been in awful condition, for decades or perhaps even hundreds of years, yet using the right methods and products I successfully completed the full restoration within a single week. The customer was absolutely over the moon with the result.

Old Slate Flagstone Floor Restoration in Oxfordshire

Old Slate Flagstone Tiled Floor Brought Back to Life in Banbury Read More »

Quarry Tiled Floor Banbury Before After Cleaning

Removing Carpet Glue from Quarry Tiles in Banbury

This Quarry tiled floor at a house in Banbury had previously been covered in carpet which had been stuck to the floor with an adhesive when once removed left a stain of white marks all over the floor. The customer had taken the floor as far as they could so I got the call to complete the restoration.

Quarry Tiled Floor Banbury Before Cleaning

Restoring Quarry Tiles

The first process was to tape the newly papered wall to protect them from any splashes during the cleaning process. I then scrubbed in a dilution of Tile doctor Pro-Clean with the assistance of a rotary floor machine fitted with a black pad and then rinsed off the resultant slurry.

This process defiantly made an improvement but I can see more work would be needed so I then applied a mixture of Pro-Clean and HBU (Heavy Build-up Remover) to the floor and scrubbed this with a carbon brush attached to a rotary floor machine. This proved to be more effective removing the carpet glue marks so I then rinsed the floor with water and used my wet vacuum to remove the slurry. I then gave the floor a thorough rinse with water again using the wet vacuum to extract the solution afterwards.

To finish the cleaning of the floor and remove any grout smears and other minderal deposits I applied Tile Doctor Acid Gel to the floor; this was left to dwell for a short time before scrubbing in with a stiff brush and then rinsed away with more water and extracted again using the wet vacuum.

The last job of the day was to fill in some holes in the tiles with a colour matching resin filler.

Sealing a Quarry Tiled floor

I returned two days later and confirmed the floor was dry ready for sealing. To seal the floor I first applied a coat of Tile Doctor Colour Grow which is an impregnating seal that also enhances the colour of the stone. This leaves a Matt finish and I showed the client this as they was not sure what finish they wanted, after seeing this that wanted more shine to the floor so once dried I applied a couple of coats of Tile Doctor Seal & Go which is a topical sealer that gives a sheen finish to the floor.

Quarry Tiled Floor Banbury After Cleaning
The client was very pleased with the end result leaving this as feedback.

Our options were a completely new floor or renovate the existing quarry tiles. We were glad we chose renovation; the results are amazing and a lot less messy and expensive than a new floor!

Restoring a Quarry tiled floor in Oxfordshire

Removing Carpet Glue from Quarry Tiles in Banbury Read More »

Quarry Tiles After Restoration in Banbury

Quarry Tiled Floor Restoration Banbury

This house near Banbury was the tied accommodation for an old village police station from the days when the local bobby would live in the house next door. I’m sure the Quarry tiled floor had a rich history which no doubt contributed to its poor state and was eventually was covered up with linoleum which had been stuck to the tiles with adhesive. Recently however the house had been sold and redecorated and the new owner wanted the floor restoring to its former glory.

Quarry Tiles Before Restoration in Banbury

Restoring Quarry Tiles

I started by covering the floor with a dilution of Tile Doctor Remove & Go which was left to dwell for 20 minutes taking care to ensure it didn’t dry out; it was then scrubbed into the floor with a black pad attached to my Rocky floor machine. This process removed most of the glue on the floor so after removing most the slurry and inspecting the floor I could see it would be necessary to repeat the whole process again and get down on my hand and knees to scrape off the thicker parts of the glue.

Once the glue had been removed the floor it was rinsed with clean water which was then removed using a wet vacuum. The next process was to clean the dirt out of the pores of the tile using a dilution of Tile Doctor Pro Clean and warm water. Again the solution was left to soak into the tiles before scrubbing, rinsing and removing with the wet vacuum.

After a lunch break the surface of the floor was drying and I noticed that the tiles we’re going white which would need to be dealt with before sealing. Older floors tend not to have a damp proof course which can lead to damp rising up through the tile depositing white salts on the surface in the process. This problem is called efflorescence and to resolve the tiles needed to be treated with Tile Doctor Grout Clean Up which was scrubbed into the tiles and washed off as before. The floor was then vacuumed dry and then left so it could dry out completely.

Sealing a Quarry Tiled floor

I returned a couple of days later and the floor was dry and clean but looking rather dull; to put some life back in the floor it was going to need to be sealed. I first put a coat of Tile Doctor Colour Grow down which brought the colour back into the tiles plus this is a good sealer on its own as it impregnates the pores of the tile and makes a terrific base seal. To complete I followed up with a number of coats of Tile Doctor Seal & Go which Is a topical sealer that provided the shiny finish the customer wanted.

Quarry Tiles After Restoration in Banbury
The quarry tiled floor is now restored from what was once a very old neglected floor to a nice clean easy to maintain surface.

Restoring a Quarry tiled floor in Oxfordshire

Quarry Tiled Floor Restoration Banbury Read More »

Banbury Slate Flagstone Tiles After Cleaning

Cleaning Old Slate Flagstones Tiles in Banbury

These photographs from the hallway of a house in Banbury where old thick slate tiled floor had been laid and the customer was unable to get them clean or restore any colour back into the stone.

Banbury Slate Flagstone Tiles Before Cleaning

Cleaning Slate Flagstone Tiles

I prepped the skirting boards with masking tape to protect them and then cleaned the floor with a strong dilution of Tile Doctor Pro-Clean which was left to dwell on the floor for a while before being worked into the flagstones by hand using a stiff bristle brush. Normally I use a rotary machine fitted with a scrubbing pad for this but given it was a small area it made sense to get on my hands and knees and apply some elbow grease. This process soon saw the dirt coming out of the tile and the dirty solution was removed using a wet vacuum before rinsing the floor down with clean water. This allowed me to see the stubborn areas where more Pro-Clean and elbow grease were applied, again this was removed and the floor given a thorough rinse using a wet vacuum to remove the liquids and get the floor dry.

Sealing Slate Flagstone Tiles

The floor soon dried so it wasn’t long before I could seal it for which I used two coats of Tile Doctor Colour Grow Sealer which as its name suggest enhances the natural colours in the stone. Once this was dry I continued with a couple of coats of Tile Doctor Seal and Go which adds a nice low sheen to the stone as well as adding to the protection provided by the sealer. As you can see it brought all the dark slate colour back and the sealer should ensure the floor is easy to clean in future.

Banbury Slate Flagstone Tiles After Cleaning
 

Large Slate Flagstones Cleaned and Sealed in Banbury

Cleaning Old Slate Flagstones Tiles in Banbury Read More »

Ruined Limestone Floor Banbury Before

Ruined Limestone Tiled Floor Restored in Banbury

If you’re passionate about tiled floors and easily upset I suggest you look away now as believe it or not the photographs below are from a recently laid Limestone tiled floor in Banbury. It had been left in a very poor state by the tiler who had managed to cover in Grout Haze and then in the process of trying to rectify the problem by cleaning it off with acid managed to etch the surface of the Limestone making the situation even worse. Limestone being a calcareous stone can in fact be dissolved by acids, in face it’s not unknown for mildly acidic cleaning products to cause holes to appear in the surface over time.

Restoring Limestone Tiles

To resolve we had to strip back the Limestone surface using a set of burnishing pads, these diamond encrusted pads come in a number of different colours each one does a different job from honing to polishing. I started with the coarse pad together with water and then carried on through the set until I got to the finer pad removing the soiled water with a wet vacuum along the way. Finally when I had dried the floor I used a finishing pad to buff the floor up. This activity took most of the day so left the floor to completely dry overnight.

Sealing Limestone Tiles

The following day I checked the floor to make sure it had dried, which it had and started to seal the floor which was done using a couple of coats of Tile Doctor Colour Grow Sealer which is an impregnating sealer which gets into the pores of the Limestone to prevent dirt being trapped, the formula as well as providing stain protection also enhances the natural colours in the stone.

I think you will agree we achieved a good result given the original condition of the tile. I should also mention that I also gave the customer a finishing pad as they owned a floor machine and using this on the floor even once a month will keep the honed surface tight and keep the seal working longer.

Limestone Tile Restoration in Oxfordshire

Ruined Limestone Tiled Floor Restored in Banbury Read More »

=================================

Oxfordshire Tile Doctor

================================= Read More »

Scroll to Top