This client from Burford in the Cotswold hills contacted us to see if I could polish up a Limestone table which was now surplus to requirements, and they wanted to sell it. They realised though that the polished appearance was dull and unappealing, so if it was to achieve the best price if would need polishing first.
We discussed the project over the phone and I explained that although we are more used to polishing stone floors with large diamond burnishing pads there was no reason why the same technique wouldn’t work on the table. For this project we would use smaller six-inch pads that can be fitted to a hand-held buffer machine. Confident I could complete the work and get the table back to its former glory I agreed to call in and demonstrate the process.
Polishing a Limestone Tiled Table
Using a set of small diamond burnishing pads of increasing grits and water I was able to quickly polish a sample area of the table to a nice shine. This newly polished section really highlighted just how dull the rest of the table had become. Like any polished surface it will lose its lustre over time with regular use and potentially cleaning with the wrong products.
Happy my solution was effective, and the price was right, he asked me to continue and polish the whole table. I put tape around the edge of the table to prevent splashes and had a dust sheet on the floor.
Next using a flex polishing machine fitted a six-inch 200-grit pad the stone was lightly cut back to remove the staining and cup marks. A little water is used during this process to help lubricate and a sponge with more water is used afterwards to remove the slurry which is generated. This process was then repeated using 400, 800, 1500 and finally a 3000-grit pads until the Limestone was polished to a honed finish. Again, the slurry was sponged away after each pad.
Sealing a Limestone Table
Then to get a very deep durable Tile Doctor Shine Powder was applied which is ground into the stone using a White buffing pad. Once this had dried, I buffed the table with another White pad to leave table looking like new.
The client was delighted with the finished result and considered keeping it for a moment! However, they were satisfied that they could now sell it for a good price. For the maintenance cleaning of polished stone tables and countertops we recommend Tile Doctor Stone Patina Spray which is very easy to apply and helps protect the polish.
Although we specialise in the maintenance of tiles, stone or grout, mainly involving floors, but from time to time we do get asked to do something different such as resurfacing stone tables or work surfaces. It makes a nice change to complete something different and is very satisfying when the results are as good as this.
Tile Doctor have the products, equipment and experience to tackle all sorts of stone, tile and grout related problems; internal and external including full Refurbs and even stain removal with products such as Tile Doctor Reduxa which can lift Red Wine stains out of natural stone.