I was recently contacted by a client living in the historic market centre of Bicester, one of the fastest growing towns in Oxfordshire. Many will know Bicester for its famous shopping village.
They had a small, dirty Terracotta and Slate tiled conservatory which had suffered from water damage and a loss of colour. Terracotta and Slate are examples of naturally porous tiles which can suffer from dirt becoming trapped/ingrained into its pores making it difficult to clean for the regular homeowner with everyday cleaning products. The water damage had also left stubborn stains on the floor which would require professional attention to remove.
Cleaning a Terracotta and Slate tiled floor
My first task was to cover the whole floor with Tile Doctor Remove & Go, mixed with water to form a solution. Remove & Go is a powerful cleaner that needs to be left to dwell for roughly ten minutes when first applied. This allows the product to soak into the pores of the stone, thereby getting underneath dirt and lift it out. After allowing the solution to dwell, I then agitated the surface with a brush attached to a floor machine to remove the particularly difficult muck.
In this process of doing this, I unveiled some staining in the floor. To tackle this I used NanoTech HBU (previously known as Ultra Clean), which uses nano-sized particles to remove heavy soil build-up in places other products simply cannot reach.
Following this I repeated the cleaning process with Remove & Go until I was satisfied that the conservatory floor had been cleaned to the best of my abilities. All of the resulting soiled residue was quickly extracted using a wet-vac machine. The floor was then given a final rinse before leaving to dry completely overnight before returning the next day to seal the tiles.
Sealing a Terracotta and Slate tiled floor
On day two and after checking the floor had dried, I applied several coatings of Tile Doctor Seal & Go to seal the floor. This helped to restore the desired colourful sheen finish to the floor, whilst also guaranteeing durable surface protection for the future. Seal & Go is suitable for use on internal, unsealed porous surfaces such as Terracotta, Sandstone, Slate, and more.